 |
MS-10A Drill
- High Production Multi-Hole Drilling
- Drills Up To 10 Holes in One Stroke
- Maximum Drill Bit Diameter 1/2"
- 2-1/2" Drilling Capacity
- Powerful Hydraulic Operation
- Easy Head Adjustment
- Variable Speed Stroke Control
- Automatic Paper Chip Removal
- Rugged Cast Iron Construction
- Flexible Side Guide Adjustments
- Multi-Splined Drive Shaft
- Backgauge Adjustments
- Lighted Work Surface
|
| Maximum Number of Drill Heads |
10 Heads |
| Drill Sizes Available** (2" capacity) |
1/8" to 1/2" / 3 to 13 mm |
| Drill Sizes Available (2-1/2" capacity) |
1/4" to 1/2" / 6 to 13 mm |
| Center to Center Distance Maximum |
21" / 53 cm |
| Center to Center Distance Minimum*** |
1-1/4" / 3.2 cm |
| Minimum Distance Between Holes w/ Adj. Stops |
3/8" / 9.5 cm |
| Minimum Distance Between Holes w/ Fixed Gauges |
1/4" / 6 mm |
| Maximum Drilling Capacity |
2-1/2" / 6.35 cm |
| Strokes per Minute (adjustable) |
18 to 26 |
| Backgauge Adjustment |
0 to 9" / 0 to 23 cm |
| Vertical Adjustment of Individual Heads |
1/4" / 6 mm |
| Table Size |
24" x 36" / 61 x 91 cm |
| Table Height |
38" / 96.5 cm |
| Overall Height |
60" / 152 cm |
| Floor Space Needed |
35" x 40" / 89 x 102 cm |
| Net Weight (approximate) |
1350 lbs / 675 kg |
| Shipping Weight (approximate) |
1660 lbs / 830 kg |
| Electrical (Standard) |
3 Phase, 60 Hz, AC. Pump: 3/4 HP.
Spindle Motor: 3 HP.
208 Volts, 14 Amps (service size 20 Amps) or
230 Volts, 12.8 Amps (service size 20 Amps) or
460 Volts, 6.6 Amps (service size 15 Amps)
|
| Electrical (Optional) |
1 Phase, 60 Hz, AC. Pump: 3/4 HP.
Spindle Motor: 3 HP
208 Volts, 26.5 Amps (service size 40 Amps) or
230 Volts, 24.2 Amps (service size 40 Amps)
|
